Howto determine whether the brake pads are replaced? Automobile brakepad manufacturers tell you, today we will talk about this topic,broken brake pads need to be replaced, so how to judge the quality ofthe brake pads?Automotive brakepads manufacturers Summarize it for everyone.
Thebrake pad alarm line is used to detect the wear of the brake pads.When the brake pads are worn to a certain extent, the probe of theinduction line will frictionally contact the brake disc to generatean electronic signal, which will be fed back to the instrumentinformation board (the brake warning light is on).
Ingeneral, there is one induction line on the front and rear wheels ofthe car, one is independently detachable, and the other is embeddedin the brake pads. For the detachable alarm line, as the brake padsare used to the limit position, the sensing probe will be wornaccordingly. In order to play a timely warning role, it isrecommended that the alarm line should be replaced every time a newbrake pad is replaced.
Ingeneral, the brake pads are worn to the low service limit, and thebrake indicator on the car instrument equipped with brake padthickness sensing will light up. At this time, it means that thealarm line has been rubbed. In addition, the warning lights areusually on for the following reasons: insufficient brake fluid, thehandbrake is not loosened, the brake pads need to be replaced, andother circuit failures.
Ifthe brake light is long on caused by the handbrake, it is recommendedto relax the handbrake and then check, or add brake fluid and thencheck, and judge whether your car has other circuit failures. Toeliminate the above possibility, it is recommended to go to themaintenance company to check the brake pads outside the use cycle ofthe brake pads. As soon as the service life of the brake pads isreached, the alarm line will be worn to varying degrees. At thistime, the alarm line should be replaced.
Formore information about automotive brake pad accessories,please visit our official website:http://www.bainuobrake.com
