Weare also able to self-check the brake pads, so how to self-check thebrake pads?Automotivebrake pads manufacturers will summarize the self-inspection method of automobile brake padsfor everyone.
Methodone:observe the thickness of brake pads
Undernormal circumstances, the thickness of the new brake pads is about1.5cm, and the thickness will gradually become thinner under ourcontinuous "destruction. Experts suggest that when the thicknessof the brake pads is only about 1/3 of the original thickness (about0.5cm), the owner should increase the frequency of self-inspectionand be ready to replace it at any time.
Therewill be a protruding mark on both sides of each brake pad. Undernormal circumstances, the thickness of this mark is about two orthree millimeters. Of course, this is also the limit for thereplacement of the brake disc. Therefore, when the thickness of thebrake pad is close to this mark, The owner must be ready to observeat any time. Without removing the tire, it is difficult to accuratelyobserve with the naked eye, at present, many models will prompt theposition of the instrument handbrake light when the brake pads aretoo thin, which is more convenient than self-inspection.
Method2:Listen to the problem
Whenyou hear the sound of "iron rubbing iron" when you lightlytap the brake (it may also be caused by the running-in of the brakepads at the beginning of installation), the brake pads must bereplaced immediately. Because at this time, the limit marks on bothsides of the brake pad have directly rubbed the brake disc, provingthat the brake pad has exceeded the use limit. At this time, it maynot be as simple as changing the brake pads. The brake discs shouldalso be checked at the same time, because when the sound of "ironrubbing against the iron" occurs, in most cases, the brake discshave been worn out. If the sound cannot be eliminated after replacingthe brake pads, The brake disc must also be replaced!
Method3:Feel with your feet
Itis your feet that interact with the brakes every day, and you shouldpay more attention to the "foot feeling" when driving ".When it is difficult to step on the brakes, it is likely that thebrake pads have basically lost friction. There is no other choice butto replace the brake pads immediately.
Theabove is the self-inspection method of brake pads shared byautomobile brake pad manufacturers.
Formore information about automotive brake pad accessories,please visit the official website: http://www.bainuobrake.com
